We use this 24 volt transformer to power the 2 LED bulbs in series: 12v+12v=24 volts. Isolated UL Listed, Fused Secondary, and Encapsulated, with PTC Fused protection in case of short circuit. Will auto-reset in case of short. 24vac 20VA Transformer to convert standard 110vac. to 24 vac. Safely plugs into any indoor standard home residential outlet. Use the 2 AC connections to power your light. The transformer we use is a multipurpose power supply for many devices some that may require a ground. For dry locations only. There is a center screw lug to use as earth ground only.
Connect the 2 wires to the "AC" screw contact lugs to power the Charm-Lite Gas Light Conversion Kit.
The only reason transformers fail is because of lightning or because wrong bulb. Make sure that you are installing the LED bulbs that are AC/DC.
SPECIFICATIONS
■ Input voltage: 120VAC 60Hz
■ Rate current: 830mA
■ Output voltage: AC 24 V +/- 5%
■ No load voltage: AC 28.5VMax
■ Exciting current (Io): 70mA Max. at input 120VAC 60Hz
without secondary load.
■ Insulation test: 500 VDC 100MΩ Min. between input
plug and output terminal and case.
■ AC blade pull test: Pull AC blades by 35lb for one
minute without pull out from the case.
■ Temperature rise: Input120VAC 60Hz with secondary
load 2400 mA, shall not exceed 40deg on case surface
(By them10meter) 72deg for primary winding (By
resistance method). At ambient temp. 25°C
■ Normal operating temperature at: -10°C ~ +40°C
■ Storage temperature at: -20°C ~ +70°C
■ Normal operating humidity at: 30% ----- 85% R.H.
■ Net Weight (APPROX.): 430g.
