24 Volt Residential Dusk to Dawn Control

Starting at: $19.95

NEW AND IMPROVED!

Now with 8 second delay for LED

Solid State Dusk to dawn controls 12-24 volts AC. Pole mounted detects ambient light and automatically switches on at dusk and off at dawn. No manual timers to set. Conserves energy, by automatically coming on at dusk and turns off at dawn.

The new dusk-to-dawn control is a perfect match with our LED bulbs and we are hoping that everyone will start using our LED bulbs. The look and feel, 1/10 the cost to operate over incandescent bulbs, and the long 5 year life make LED bulbs the better choice.

  • Conserves electric energy
  • Saves consumers money on utility bills
  • Senses ambient sunlight
  • Waterproof potted in epoxy-resin
  • A built in delay to reduce any flicker 
  • Smaller allthread requiring a smaller 3/8" drill bit 
  • Cold SMT circuitry reducing deterioration 

 

You must wire Accordingly. Failure to do so may damage the eye!

 

 

 

Drill a 3/8" hole to mount threaded nipple. Use nut on the inside of hole and plastic nut on the end of nipple.
If you are replacing an eye with a larger hole, use the washer on the outside of hole and then place the nut on the outside to hold the eye in place. Finger tight, DO NOT over tighten.
This is a very sensitive device that will see through your finger. Use opaque, black tape over the eye opening and wait 8 seconds to test. 

  • Choose Bulbs for a 25% Discount!

Add to Cart:

  • Model: DIY3A
  • Shipping Weight: 0.5lbs

Please Choose:

What bulb type do you want with your order?




Customers who bought this product also purchased...



Copyright © 2017 Charm-Lite Inc.. Powered by Zen Cart
Buy SSL Certificate